From 3f07ab2e03e501ae55d1d1b0d031daf50c8e13e5 Mon Sep 17 00:00:00 2001
From: dongyukun <1208714201@qq.com>
Date: 星期二, 10 十二月 2024 17:27:44 +0800
Subject: [PATCH] common依赖排除父类
---
iailab-xmc-pms-biz/lib/bak-202309/readme.md | 61 ++++++++++++++++++++++++++++++
1 files changed, 61 insertions(+), 0 deletions(-)
diff --git a/iailab-xmc-pms-biz/lib/bak-202309/readme.md b/iailab-xmc-pms-biz/lib/bak-202309/readme.md
new file mode 100644
index 0000000..0458d2e
--- /dev/null
+++ b/iailab-xmc-pms-biz/lib/bak-202309/readme.md
@@ -0,0 +1,61 @@
+# 配煤模型
+```
+ // 硫分 +1.8密度级没有 则与上一密度级保持一致。
+ int[] input = {1,2}; //有N种煤参与，则为{1,N} //20230926 coalblendmodel
+ MWCellArray inputCompDataSrc1 = new MWCellArray(input);
+
+ double[][] inputFSDataSrc1 = {//第一种煤的浮沉数据 综合数据
+ {1.4 ,39.46,6.52,1.83},
+ {1.8 ,20.67,27.16,1.71},
+ {1.8 ,39.87,79.9,1.71}};
+ double[][] inputFSDataSrc2 = { //第二种煤的浮沉数据
+ {1.4 ,77.42,3.33,2.44},
+ {1.8 ,8.76,18.28,4},
+ {1.8 ,13.82,76.4,4}};
+ double[][] rawCoalParam = {{759},{1667}};//各个煤的价格 N种煤则为N行
+
+ double[][] qualitySetDataSrc1 = {{0},{2} }; //目标硫分
+
+ double[] cleanCoalAsh1AndPrice = {9,1900} ; //精煤灰分及价格
+ inputCompDataSrc1.set(1,inputFSDataSrc1);
+ inputCompDataSrc1.set(2,inputFSDataSrc2);
+
+
+ CoalBlendModel coalBlend = new CoalBlendModel();
+
+ double[] xSet = {}; //编辑后计算，即用户手动设置的配煤量数据 若保存并计算则为空
+ Object[] allResult = coalBlend.coalBlend(2,inputCompDataSrc1,rawCoalParam,qualitySetDataSrc1,cleanCoalAsh1AndPrice,xSet);
+ MWCellArray result = (MWCellArray)allResult[0];
+
+
+ double[][] result1 = (double [][])result.get(1);//各煤比例
+ if (result1[0][0]<0){
+ System.out.println("无方案"); //无方案输出全部置空
+
+ return;
+ }
+ double[][] result2 = (double [][])result.get(2);
+ double[] theoryYieldDensity = result2[0];//理论产率和分选密度 第一个为理论产率，第二个为理论分选密度
+
+ MWCellArray temp = (MWCellArray)allResult[1];
+
+
+ double[][] test1 = (double [][])temp.get(1);
+ double[] effect = test1[0];//混煤预计效果 分别为硫分，水分，发热量，灰分
+
+ double [][] test2 = (double [][])temp.get(2);
+ double[] xAxis1 = test2[0];//若需要绘制混煤可选性曲线 的下横灰分坐标
+ double [][] test3 = (double [][])temp.get(3);
+ double[] xAxis2 = test3[0];//若需要绘制混煤可选性曲线 的上横密度坐标
+ double [][] test4 = (double [][])temp.get(4);
+ double[] floatVue = test4[0];//若需要绘制混煤可选性曲线 的浮物曲线数据
+ double [][] test5 = (double [][])temp.get(5);
+ double[] cellVue = test5[0];//若需要绘制混煤可选性曲线 的灰分特性曲线数据
+ double [][] test6 = (double [][])temp.get(6);
+ double[] sinkVue = test6[0];//若需要绘制混煤可选性曲线 的沉物曲线数据
+ double [][] test7 = (double [][])temp.get(7);
+ double[] denstiyDataResult = test7[0];//若需要绘制混煤可选性曲线 的密度曲线数据
+ double [][] test8 = (double [][])temp.get(8);
+ double[] denstiyScopeData = test8[0];//若需要绘制混煤可选性曲线 的密度±0.1曲
+
+```
\ No newline at end of file
--
Gitblit v1.9.3